close

最近因為要用LabVIEW抓Webcam的影像，

安裝了Vision Module和Vision Acquistion Software，發現有兩個Driver: IMAQ與IMAQdx，

好奇之下查的一下這兩個由甚麼不同?

參考網頁: http://digital.ni.com/public.nsf/allkb/0564022DAFF513D2862579490057D42E

 

1. The NI-IMAQ driver software supports National Instruments hardware only and is needed to use the following image acquisition devices:

簡單的說NI-IMAQ是支援NI開發的硬體的 Driver，適合的硬體如下:

  • National Instruments Camera Link Frame Grabbers
  • National Instruments Parallel Digital Frame Grabbers
  • National Instruments Analog Frame Grabbers
  • National Instruments 17xx Smart Cameras

2. The NI-IMAQdx driver software is needed to use third-party image acquisition devices which use the following buses and standards:

而NI-IMAQdx是支援使用第三方影像擷取裝飾的Driver，響螢幕上的Camera或是WebCAM都屬於這一類，

  • Gigabit Ethernet Cameras Supporting GigE Vision
  • FireWire IEEE 1394 Cameras
  • USB 2.0 Cameras Supporting Microsoft DirectShow
  • USB 3.0 Cameras Supporting USB3 Vision


3. The NI-IMAQ I/O driver software is a smaller driver API used exclusively to program the National Instruments Vision RIO image acquisition cards including the following cards:

NI-IMAQ I/O是支援NI的視覺RIO影像擷取卡的Driver

  • NI PCIe-8255R
  • NI PCI-8254R
  • NI PCIe-8237R
arrow
arrow
    文章標籤
    IMAQ driver IMAQdx
    全站熱搜

    fishark 發表在 痞客邦 留言(0) 人氣()

    E-mail轉寄